Machine comparison R Series
- End working device, discharge unit for short-length rods, adjustable rotor are available as options
- iQm-straight In-process straightness measurement of straightened rods
- Available for all materials and profiles
- Even better performance with even more user convenience
- Minimization of set-up times
- Optimized, language-neutral operator guidance
- Reuse of some of the tools from previous models possible
- Improved working conditions due to service notes and electronic operating instructions
Please select wire diameter [mm]
R 36
from 1.5
to 7 mm
| Wire diameter | 1.5 - 7 mm |
| 400-800 N/mm² | 1.5 - 7 mm |
| 800-1200 N/mm² | 2 - 6.5 mm |
| 1200-1600 N/mm² | 2 - 6 mm |
| Feed speed | 5 - 180 m/min |
| Cuts per minute | max. 320 pcs./min* |
R 13
from 0.65
to 2.5 mm
| Wire diameter | 0.65 - 2.5 mm |
| 400-800 N/mm² | 0.65 - 2.5 mm |
| 800-1200 N/mm² | 0.8 - 2 mm |
| 1200-1600 N/mm² | 0.8 - 1.6 mm |
| Feed speed | 3 - 90 m/min |
| Cuts per minute | max. 276 pcs./min* |
R 23
from 1
to 4 mm
| Wire diameter | 1 - 4 mm |
| 400-800 N/mm² | 1 - 4 mm |
| 800-1200 N/mm² | 1.2 - 3.6 mm |
| 1200-1600 N/mm² | 1.2 - 3.2 mm |
| Feed speed | 5 - 120 m/min |
| Cuts per minute | max. 300 pcs./min* |
R 23S
from 1
to 3.5 mm
| Wire diameter | 1 - 3.5 mm |
| 400-800 N/mm² | 1 - 3.5 mm |
| 800-1200 N/mm² | 1.2 - 3 mm |
| Feed speed | 5 - 140 m/min |
| Cuts per minute | max. 300 pcs./min* |
R 36B
from 3
to 8 mm
| Wire diameter | 3 - 8 mm |
| 400-800 N/mm² | 3 - 8 mm |
| 800-1200 N/mm² | 3.5 - 7 mm |
| 1200-1600 N/mm² | 3.5 - 6.5 mm |
| Feed speed | 5 - 180 m/min |
| Cuts per minute | max. 320 pcs./min* |
R 36S / R 36SG
from 1.5
to 6 mm
| Wire diameter | 1.5 - 6 mm |
| 400-800 N/mm² | 1.5 - 6 mm |
| 800-1200 N/mm² | 2 - 5.5 mm |
| 1200-1600 N/mm² | ---- |
| Feed speed | 5 - 180 m/min |
| Cuts per minute | max. 320 pcs./min* |
R 45
from 3
to 10 mm
| Wire diameter | 3 - 10 mm |
| 400-800 N/mm² | 3 - 10 mm |
| 800-1200 N/mm² | 4 - 9 mm |
| 1200-1600 N/mm² | 4 - 8 mm |
| Feed speed | 5 - 180 m/min |
| Cuts per minute | max. 220 pcs./min* |
R 45B
from 4
to 12 mm
| Wire diameter | 4 - 12 mm |
| 400-800 N/mm² | 4 - 12 mm |
| 800-1200 N/mm² | 5 - 10 mm |
| 1200-1600 N/mm² | 5 - 9 mm |
| Feed speed | 5 - 180 m/min |
| Cuts per minute | max. 220 pcs./min* |
R 53
from 5.6
to 14 mm
| Wire diameter | 5.6 - 14 mm |
| 400-800 N/mm² | 5.6 - 14 mm |
| 800-1200 N/mm² | 6 - 12 mm |
| 1200-1600 N/mm² | 6 - 11 mm |
| Feed speed | 5 - 160 m/min |
| Cuts per minute | max. 162 pcs./min* |
R 53B
from 7
to 15 mm
| Wire diameter | 7 - 15 mm |
| 400-800 N/mm² | 7 - 15 mm |
| 800-1200 N/mm² | 7 - 13 mm |
| 1200-1600 N/mm² | 7 - 12 mm |
| Feed speed | 5 - 160 m/min |
| Cuts per minute | max. 162 pcs./min* |
| * Option | 0 - 0 |
R 53BC
from 7
to 15 mm
| Wire diameter | 7 - 15 mm |
| 600-2000 N/mm² | 7 - 12 mm |
| 600-1800 N/mm² | 7 - 13 mm |
| 600-1550 N/mm² | 7 - 14 mm |
| 600-1350 N/mm² | 7 - 15 mm |
| Feed speed | 5 - 140 m/min |
| Cuts per minute | max. 162 pcs./min* |
| * Option |
R 23S
New definition of productivity, with high-end straightening machines of the R series
WAFIOS R machines have been designed for the production of straightened and cut-off rods. They provide new technical solutions for increasing your output and optimizing costs.
Increased output by servo-adjustable spinner
Increased operating convenience due to motor-driven adjustment of straightening dies during production. Minimum downtimes when inserting wire. Therefore, higher output by shorter tooling times.
iQm-straight In-process straightness measurement of straightened rods
iQm-straight enables the in-process measurement and control of straightened rods to assess and optimize the quality. A camera measures, by means of backlighting, the straightness of rods after they have been cut off.
Further information
